DISC ROTOR – Remove & Replace – Front, Both Sides – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
DISC ROTOR – Remove & Replace – Rear, Both Sides – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
CALIPER – Remove & Replace – Front or Rear, One Side – [Includes: Bleed Brake System and replace Pads (if necessary).]
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
WHEEL BEARING – Remove & Replace – RWD Front, Hub Assembly, One Side – [DOES NOT include wheel alignment.] – [Includes: Replace Inner and/or Outer Bearings, Cups, Seals and repack (where applicable).]
TIE ROD &/OR END – Remove & Replace – Outer, One Side – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some model
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel.
Dom C. gave our service a 5 star review on 6/18/2026
DISC ROTOR – Remove & Replace – Front, Both Sides – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
DISC ROTOR – Remove & Replace – Rear, Both Sides – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
CALIPER – Remove & Replace – Front or Rear, One Side – [Includes: Bleed Brake System and replace Pads (if necessary).]
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
WHEEL BEARING – Remove & Replace – RWD Front, Hub Assembly, One Side – [DOES NOT include wheel alignment.] – [Includes: Replace Inner and/or Outer Bearings, Cups, Seals and repack (where applicable).]
TIE ROD &/OR END – Remove & Replace – Outer, One Side – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some model
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel.
Dom C. gave our service a 5 star review on 6/18/2026
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
Vehicle Inspection, Check Vehicle for proper function & Safety
Amy B. gave our service a 5 star review on 7/12/2023